AISI D3 Cold Worked Tool Steel
The usage of AISI D3:
1. Cutting tools: make cutting tools such as knives, blades, and shears due to its high wear resistance and ability to maintain sharp edges.
2. Dies and punches: use in the manufacturing of dies and punches for stamping, forming, and cutting operations.
3. Cold work tooling: the tool steel is subjected to high levels of stress and wear, such as in the production of molds, dies, and machine parts.
- HONGXIN
- DAYE
- 30 DAYS
- 8000 TON/MONTH
- Information
AISI D3 Cold Worked Tool Steel
1: AISI D3 steel introduction
AISI D3 cold work steel, also know as DIN 1.2080 (Werkstoff) and JIS SKD1, is a 12% chrome alloy steel. D3 cold work steelhas very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. Type AISI D3 cold works tool steel is oil-quenched; though small sections can be gas quenched after austenitization using vacuum. As a result, tools made with type D3 cold work tool steel tend to be brittle during hardening.
2: AISI D3 Steel equivalent
Country | China | Japan | Germany | USA | UK |
Standard | GB/T 1299 | JIS G4404 | DIN EN ISO4957 | ASTM A681 | BS 4659 |
Grade | Cr12 | SKD1 | 1.2080/X210Cr12 | D3 |
3: AISI D3 steel chemical composition
Grade | C | Mn | P | S | Si | Cr | V | T |
D3 | 2.00-2.35 | 0.10-0.60 | 0.03 | 0.03 | 0.10-0.60 | 11.0-13.5 | 1.10 | 1.10 |
1.2080/X210Cr12 | 1.90-2.20 | 0.20-0.60 | / | / | 0.10-0.60 | 11.0-13.0 | / | / |
SKD1 | 1.90-2.20 | 0.20-0.60 | 0.03 | 0.03 | 0.10-0.60 | 11.0-13.0 | / | / |
4: AISI D3 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
5: AISI D3 steel overviews
Size | Round | Dia 12-500mm |
Plate/Flat/Block | Thickness 8mm-300mm | |
Width 210mm-710mm | ||
Process | EAF+LF+VD+Forged+Heat treatment(optional) | |
Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
Delivery condition | Forged; Hot rolled; Cold drawn | |
Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
Payment terms | T/T;L/C;/Money gram/ Paypal | |
Trade terms | FOB; CIF; C&F; etc.. | |
Packing | Standard Packages, or as Customers Request | |
Delivery time | 30-45 days | |
Application | D3 is suitable for applications such as complex blanking and forming tools for long runs and for hard and abrasive materials. |
6: Heat treatment
Isothermal annealing:
- Heat to 800°Cand hold at temperature for 1/2 h to 1 h;
- Furnace cooling to 670°Cand hold at temperature for at least 10 hours;
- Cool by 10°C/h to 630°C;
- Cooling in air.
Maximum hardness:≤240 HB
Stress relieving:
To be carried out after maching before the final heat treatment.
- Heat to 600-650°C, hold for 4-6 hours;
- Cooling in furnace to 300-350°C;
- Cooling in air
Hardening:
- Initial preheating to 350-450°C;
- Second preheating to 650-750°C;
- Heat to hardening temperature 860-890°Cand hold at temperature;
- Cooling in hot oil (40-60°C); oil quenched hardness: 54-59HRC;
Tempering:
Tempering must be carried out within one hour from hardening(warm part) in the range 550-630°Cfor 4-6 hours according to hardness required, the dimensions of the parts and operating conditions.
7: Delivery condition
For hot forged or hot rolled bar, usually the delivery condition is hot forged or rolled, annealed, rough turned.
For hot forged plate, usually the delivery condition is hot forged, annealed, milled surface.
For hot rolled plate, usually the delivery condition is hot rolled, annealed, black surface.
Hongxin Mold Tech Co.,Ltd. owns 1 set of Hot Rolling Production Line at size range flats 8-80*210-710mm, rounds 16-50mm Dia.
12 sets of Hydraulic Forging Hammers from Power 560kgs to 6000kgs which could cover flats 40-300*210-710mm.
8 sets of EF+LF+VD
5 sets of ESR
9 sets of Milling Machines
10 sets of Turning Lathes
6 sets of Precision Milling Machines.
CERTIFICATION: GB/T19001-2016/ISO9001:2015
Products' List
Packaging&Shipping
Q1:Are you trading company or manufacturer ?
We are the biggest tool steel factory at Daye & Huangshi. We can provide a wide range of steel products.
Q2:What is alloy steel round bar export packing?
Usually bundling for large diameter,small diameter bars in bulk or as customer's demand.
Q3.What is your MOQ?
We accept small order,if it is stock,any quantities can be accepted.
Q4.What is your lead time?
Depends actual order,around 20-35 days,or negotiation.
Q5.Can you supply sample?
Yes,we can.Sample fee according to your size.
Q6:What certificates do you have?
ISO, ABS, BV, CCS, Dnv, Lr, Gl, Mill Certificate
Q7: How can I get your quotation as soon as possible?
The email and fax will be checked within 24 hours,meanwhile,the Skype,Wechat and WhatsApp will be online in 24 hours.Please send us your requirement,we will work out a best price soon.